How do I make my Belkin router a wireless bridge?
Belkin Wireless G Router, F5D7230-4….
- Connect your computer to the LAN or Ethernet port of the main router.
- Launch a web browser like Internet Explorer®.
- Enter “192.168.
- Enter your router’s Password then click Submit.
- Click Wireless Bridging under Wireless.
- Click the Enable ONLY specific Access Points to connect.
How do I connect my Belkin Range Extender to a new router?
To do this, simply press the range extender’s reset button for at least 10 seconds while it is turned ON. Power cycle the range extender then connect to the network again. Wait for your device to connect to the Belkin. setup network before proceeding to the next step.
How do I use my old Belkin router as a WiFi extender?
Enabling the Access Point option would itself disable the router functionalities of the Belkin router. Now, connect your Belkin router to the main router using an Ethernet cable. Make sure to connect the LAN port of both the routers and not the Internet port. Now you successfully configure Belkin router as repeater.
How do I connect my Belkin router to my computer?
Connect the ethernet cable from the modem to the WAN or internet port of the router. Plug both the modem and the router into a power outlet. Connect your computer to one of the ethernet ports of the Belkin router. In your computer, open a web browser such as Google Chrome™.
Is the Belkin 54G a wireless access point?
Thank you for purchasing the Belkin 54g Wireless Network Access Point (WAP) and welcome to the world of wireless networking. Now you can take advantage of this great new high-speed wireless technology and gain the freedom you need to share files among your home or office computers—without using cables.
How does a Belkin WiFi range extender work?
A Belkin Wi-Fi Range Extender. An existing Wi-Fi® network and its wireless router’s network name (SSID) and wireless password. QUICK TIP: If you are using a dual-band router, secure the SSID and wireless password of both the 2.4 GHz and 5 GHz network bands.
What’s the default IP address for a Belkin router?
Connect your computer to the LAN or Ethernet port of the main router. Launch a web browser like Internet Explorer®. Enter “192.168.2.1” in the Address bar, then press [Enter]. NOTE: 192.168.2.1 is the default IP Address of Belkin routers. If the default IP Address doesn’t work, check your router’s IP Address. For instructions, click here.