How do you reset the error light on a Brother HL-2240?

By Helpful tips

How do you reset the error light on a Brother HL-2240?

Brother HL-2240 – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do I clear a Brother printer error?

To clear these messages, follow these steps:

  1. Press the ON/OFF key to turn the Brother machine off.
  2. Unplug the Brother machine from the electrical outlet.
  3. Wait approximately ten seconds.
  4. Plug the Brother machine back into the electrical outlet.
  5. Press the ON/OFF key to turn the Brother machine on.

Why is the orange light flashing on my Brother printer?

Error light flashes orange once (1), ready light is green = Toner Low. Error light flashes orange once (1), ready light is off = Toner Empty. Error light flashes orange twice (2), ready light is off = Paper Jam. Error light flashes orange three (3) times, ready light is green = Replace Drum Soon.

Why does my Brother printer keep saying error?

Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.

How to reset the toner light on brother hl-2240 printer?

Here is how you reset the toner light on your Brother HL 2240: 1. Turn your Brother HL-2240 off 2. Open the front cover of the printer 3. Press and hold Go and turn power on. Do not let the button go.

How to fix brother printer in error on Windows 10?

Simple Methods to Fix Brother Printer in Error State on Windows 10 Method 1: Update the USB Drivers on your Computer Method 2: Clear the Printing Tasks and Restart the Spool Service on your Brother Printer Method 3: Use the Windows Troubleshooting Tools to Find the Problem Method 4: Uninstall the Printer’s Driver and Reinstall it Back

How do you reset the toner light on a brother printer?

Press and hold the GO button, and keep holding it down, as you turn on the power switch. Keep the GO button pressed down until all the LEDs light up and the Ready LED turns off. Release the GO button. Make sure that all the LEDs turn off. Press the GO button 10 times. The Ready LED will flash while the printer is reset.