What is the universal remote code for a GE VCR?
For list of all GE VCR remote codes check this post. GE CABLE Set-top Box Devices Universal Remote Codes ABC: 0461, 0463, 0464, 0465, 0466 ADELPHIA: 0512, 0511
How to program the Axess TV universal remote?
Follow the instructions given below: “Switch On” the smart device like “TV” that you want the universal remote to operate. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Point out the remote to device and click on “CH+” & “CH-“ switches.
How to enter 9-9-1 code on GE remote?
1 First of all “Turn The Device On”. 2 Now press and hold the “Setup” button. 3 Enter the “9-9-1” (three digit) code. 4 Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”.
How do you find the universal remote code?
In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:
Can you use a code on a remote control?
Sometimes a code will be accepted, but only allow limited function control (e.g. only volume and channel control). In this case, continue programming using the next code number for that brand. The Auto Code Search searches automatically through all of the codes stored in your remote.
What to do if your GE remote does not have a code?
The Auto Code Search searches automatically through all of the codes stored in your remote. If your device does not respond to any of the codes listed for your device, or your brand does not appear in the code lists, try the following steps: Step 1: Manually turn on the device you wish to control.
How to enter 4 digit universal remote code?
Step 1: Press and hold the “SETUP” button until the indicator light turns on, then release. Step 2: Press and release the desired Mode button (TV, DVD, CBL/SAT, etc.). The indicator light will blink, then stays lit. Step 3: Enter the 4 digit code for your device.