What equipment is involved for oxy fuel welding or cutting?
The process will cause a chemical reaction and form the slag or iron oxide. The slag then will be blown away by the oxygen jet, resulting the metal to be cut. The equipment of oxy-fuel welding and cutting is versatile, including torches, regulators, valves, and gas hoses.
What do you need for oxy acetylene cutting?
Oxyacetylene Equipment Check List Includes:
- Oxygen regulator.
- Acetylene regulator.
- Oxygen/Acetylene welding hose.
- Hose couplings.
- Single-purpose oxyfuel cutting torch.
- Cylinders and cart.
- Flash arrestor and check vales (protective equipment)
- Flint lighter to ignite torch.
What equipment is used in oxy acetylene welding?
The apparatus used in gas welding consists basically of an oxygen source and a fuel gas source (usually contained in cylinders), two pressure regulators and two flexible hoses (one for each cylinder), and a torch.
What safety equipment is required when oxy cutting?
PERSONAL PROTECTIVE EQUIPMENT
| Welding goggles must be worn at all times in work areas. | Long and loose hair must be contained. | Oil free leather gloves must be worn. |
|---|---|---|
| Sturdy footwear must be worn at all times in work areas. | Close fitting/protective clothing must be worn. | Rings and jewellery must not be worn. |
What is maximum safety working pressure for acetylene?
Subsequently, one may also ask, what is the maximum safe working pressure of acetylene? Acetylene Regulator Maximum Pressure. Acetylene line pressure that exceeds 15 psig is extremely DANGEROUS. Acetylene gas can become unstable and violently decompose when more than 15 pounds of pressure is used, so it is imperative that pressure never exceed 15 psig when working with university equipment.
How do you set up a cutting torch?
Setting up the Cutting Torch Hook up the gauges to the appropriate tanks. Make sure the acetylene regulator is turned off. Open the gas valve on top of the acetylene tank with one turn of the wrist. Open the regulator valve by turning the tee handle clockwise. Open the gas valve on the torch handle to vent it.
What is acetylene cutting torch?
An acetylene turbo torch is generally used for cutting metals. The oxy-fuel cutting process involves the combination of an oxygen source with a gas source, during which acetylene gas is used. Acetylene torches are also used for welding, which is why they are sometimes also called welding torches.