## How do you make a resistor not inductive?

A nearly non-inductive resistor can be constructed by getting a length of resistance wire which has the required resistance, folding it back on itself, and winding the doubled wire about a former. The inductance exhibited by the wire in one direction will be cancelled by the inductance in the other.

### Can you make a homemade resistor?

To create a resistor with a small resistance (or Ohm) value, use a thicker, shorter wire as the path between the two electrical leads. To create a resistor with a larger Ohm value, use a thinner, longer wire. Another factor in creating a wirewound resistor is what type of wire is used.

**What resistors are non inductive?**

Non-Inductive Resistor Types

- Type A. NH Style, aluminum body non-inductive wire wound resistor by Dale or equivalent.
- Type B. Sprague Koolohm resistors are non-inductive wire wound.
- Type C. The ultimate pure Carbon tubular non-inductive resistor.
- Carborundum 109AS.
- Kanthal Ceramic High Energy Resistors.
- Type D.
- Type E.
- Type F.

**How do you make a wire wound resistor?**

The resistor is constructed from resistance wire that is wound around a central core or former, that is usually made of ceramic. Once wound, end caps are pressed onto the core and the resistance wire is welded to them to make proper contact.

## Are there any resistors that are not inductive?

Many of the resistors that are on the market are non-inductive, such as carbon film, metal film resistors. a resistor that does have properties of an inductor is a wire-wound resistor. this is obvious as the resistor is constructed by winding a resistive wire around a mandrel to get the resistance desired.

### What is a non inductive wire wound resistor?

HTR Audiograde “Non-Inductive” wirewound Resistors A wire wound resistor is an electrical passive component that limits current. The resistive element exists out of an insulated metallic wire that is winded around a core of non-conductive material.

**How big is a 100 ohm inductive termination resistor?**

Non-Inductive Termination Resistor 100 Ohm / 225 Watt (RNI) FR200-100-NI MemcorNon-Inductive Termination Resistor. Tubular style with tabbed terminals. 100 ohm, 225 watt. 1-1/4″ diameter x 10-1/2″ long. Use for in-series / parallel for different wattages and resistance values. Type E. Used in Gates / Harris equipment. $49 each – $43 (10+)

**How big is a siliconon inductive carbon resistor?**

Siliconon-inductive carbon resistors. 100 ohms, 60 watts. Two 100 ohm resistors in parallel = 50 ohms, 120 watts. Each resistor measures 1″ x 4″. $100 each Non-Inductive Carbon Resistor