How do I activate my GPS tracker on my phone?

How do I activate my GPS tracker on my phone?

How do I enable GPS on my Android?

1. Find and tap your ‘Settings’ menu.
2. Find and tap ‘Location’ – your phone may show ‘Location services’ or ‘Location access’ instead.
3. Tap ‘Location’ on or off to enable or disable your phone’s GPS.

Why is GPS tracker not working?

Accuracy problems are usually caused weak GPS signal, in most cases it happens because GPS antenna is not able to establish good signal. Weak signal can be related to not properly positioned antenna, surrounding which blocks signal (tall buildings, tunnels, garage, underground parking lot) or low quality device.

Can a cell phone detect a GPS tracker?

Since many cell phones are already GPS enabled, the spy hawk will not be able to determine whether it is being monitored by an outside software. If you suspect that someone might be tracking you through your phone, you only have two options.

How can I setup my xexun tk102 GPS tracker by USB?

This xexun usb programming and setup tool for makes configuration much easier than before. You can now setup your GPS tracker from xexun by usb programming cable. You can find some suitable usb cables for xexun gps-trackers in our section for resources and external links .

How many tk110 devices are connected to Wialon data center?

The chart below shows the changes within the last 30 days in the number units of TK110 device type are connected to Wialon Data Center . 1132 units of TK110 device type are connected to Wialon Data Center. This represents 0.09% of all AVL Hardware connected.

Do you need a USB cable for a GPS tracker?

Be aware that using usb tools with a tracker the origin is not known to you can damage your GPS tracker. As you cannot use a common USB cable you need an original xexun TK102 USB firmware update data cable. By the way, this tool is old. 10.000 B.C. or something like that. We have written it some years ago.

https://www.youtube.com/watch?v=0gk3oKZu0F4