What is stack height in DG?

What is stack height in DG?

The minimum height of stack to be provided with each generator set can be worked out using the following. formula : H = h+0.2x ÖKVA. H = Total height of stack in metre. h = Height of the building in metres where the generator set is installed.

What is DG stack emission?

Stack Emission monitoring is referred to as Stack emission testing, stack emission monitoring, stack sampling, Source Emission Monitoring or Source Testing. It is a process to measure the emission of industrial waste or pollutants emitted into the atmosphere.

What is the minimum height of the stack for industry?

Minimum height of stack in all cases shall be 9.0 M (30 ft) or as calculated by the relevant formula whichever is more.

Is standard for DG set?

The DG set will be set up as per the standard procedure of the manufacturer and connected to the standard electrical load. Earthing shall be provided as per IS 3043: 1987. b. DG set shall run on 100% loading for 15 minutes after reaching thermal stability (as defined clause 8.7 of IS/IEC 60034 part 1: 2004).

How to calculate the stack height of a DG set?

This is an explicit formula for DG SET stack height calculation, irrespective of the type of industries where the generator set is installed. Based on the above formula the minimum stack height to be provided with different range of generator sets may be categorized as follows:

How to calculate the stack height of a generator?

The minimum height of stack to be provided with each generator set can be worked out using the following formula : This is an explicit formula for DG SET stack height calculation, irrespective of the type of industries where the generator set is installed.

How tall should a GEP stack be in meters?

) 0.8 km from the stack height that is at least 40 percent of the GEP stack height determined by the formulae provided in 1200-3-24-.02(1)(c)2.(ii) or 26 meters (85 feet), whichever is greater, as measured from the ground level elevation at the base of the stack.

Which is the best stack height calculator in India?

The calculator (stack/chimney height) is based on the various published, notifications and guidelines by Ministry of Environment, Forest and Climate Change, Government of India and Central Pollution Control Board, New Delhi. Application: To determine the regulatory, minimum stack heights in varius industries.