What cars do 4×108 fit?

By Guidelines

What cars do 4×108 fit?

Bolt pattern 4×108 What cars have a 4×108 bolt pattern?

  • Alfa Romeo (4) GT (1963-1977) Giulia (1962-1978) Montreal (1970-1977) Spider (1966-1993)
  • Audi (7)
  • Citroën (35)
  • DS (8)
  • Dongfeng (8)
  • Ford (35)
  • Jinbei (1)
  • Lifan (2)

What stud pattern is 5×108?

5×108 bolt pattern or 5×4. 3 in inches is used on 232 models. Wheels with this bolt pattern are most often used on Volvo, Chery, Ford, Ferrari, Peugeot, Citroën. These numbers mean that the wheel has 5 lug holes, that form circle between the centers of these holes, and this circle diameter is 108 mm or 4.3″.

Will a 4×100 fit a 4×108?

Re: do 4×108 fit on 4×100 (chr1z) Actually you can have the wheels redrilled to 4×108 inside the same holes. It will slightly oval the holes, but you will be fine…

What bolt pattern is 4×108?

4×108 bolt pattern or 4×4. 3 in inches is used on 148 models. Wheels with this bolt pattern are most often used on Ford, Citroën, Peugeot, Tata, Dongfeng, DS. These numbers mean that the wheel has 4 lug holes, that form circle between the centers of these holes, and this circle diameter is 108 mm or 4.3″.

Who uses 5×108?

Steel Wheels with 5×108 bolt pattern are suitable for many cars and the most common are: Ford Focus, Mondeo, Kuga, C-Max, S-Max, Galaxy, Renault Laguna, Peugeot 407, Citroen C5 III, Volvo C30, S40, V50, S60, V60, C70, V70, S80, off-road Volvo XC60 and XC70, Land Rover Freelander II, Citroen Jumpy, Fiat Scudo, Peugeot …

Does 5×112 fit 5×108?

Yes overall there is a 4mm difference on the PCD pattern but that equates to 2mm difference per bolt. With the PCD measured you can see the 2mm difference.

Will a 5×108 fit a 5×112?

Yes overall there is a 4mm difference on the PCD pattern but that equates to 2mm difference per bolt.

Can you put 5×112 on 5×108?

PCD variation nuts only allow for 2.4mm of movement so you could run 5×112 wheel on a 5×114. 4 car or 5×109. 6 car but not down to 5×108. You need adapters or a redrill.

Will 108 PCD Fit 100?

No they won’t fit mate. The holes won’t line up. 108 pcd is ford/citroen/pug fit. 100pcd is your Vauxhall, VW, Toyota, Honda and I think Rover fitment.