Should you compress metal guitars?

Should you compress metal guitars?

With metal guitars, compression is more important than ever when it comes to consistency and glue. While other guitars are susceptible to some large dynamic variations, a lot of these distorted guitars have already been crushed by the amp/amp sim far more than your standard compressor plugins ever could.

How do you record a good metal guitar?

Recording Metal Guitar at Home

1. Have your guitar set up.
2. Choose the right amp for recording metal guitar tones.
3. Cab/speaker choice (or IRs) matters.
4. Use less gain than you’d think.
5. Boost with an overdrive.
6. Dial the tone in context.
7. Double or quadruple track rhythms.
8. Use something to dampen the strings.

How do I make my guitar sound better when recording?

7 Tricks to Get a Better Electric Guitar Sound on Your Recordings

1. Use a “prepared guitar”
2. Use an acoustic as a phantom guitar.
3. Record your electric unplugged.
4. Use a low-frequency mic on your guitar cabinet.
5. Use a bass cabinet.
6. Double your tracks with different guitars.
7. Use an octave pedal.

Do you compress distorted guitars?

When it comes to distorted guitars, there are two primary approaches with compression. If you’re working with short staccato stabs or punchy chugs, it’s all about enhancing the transients. Smashing the signal with a compressor using slow attack and fast release times can help bring out the sound of the pick.

What’s the best way to compress a guitar?

Clean compression doesn’t have to be aggressive, or even noticeable for that matter. You should be able to get away with a few dB of gain reduction at a low ratio for an instantly smoothed out performance.

Why is compression important in a metal guitar?

Metalheads rejoice! These are the high-gain amplifiers and pedals that squeal if you stomp them on without muting your strings. The tones that have punched listeners in the gut and have lead loud music to the forefront for decades now. With metal guitars, compression is more important than ever when it comes to consistency and glue.

What’s the best way to record metal guitar?

The other method would be to record your amplifier the good old fashioned way with a mic. If you have an amp and killer pedal board that produces a tight high-gain saturated tone which you like the sound, then do it! Recording a live amp the old fashioned way is still one of the best ways to record metal guitars.

What’s the best compression ratio for bass music?

To start off, set your ratio between 3:1 – 4:1. Then, set your attack very slow (100ms) and your release very fast (25ms). Finally, decrease the threshold until you are getting 5-10dB’s of compression. Now that we’ve got our basic settings down, let’s tweak.