How do I clear the memory on my HP LaserJet Pro MFP M277dw?

How do I clear the memory on my HP LaserJet Pro MFP M277dw?

I understand that you get an error “Memory is low, Job Cancelled” from your HP Color LaserJet Pro MFP M277dw….Delete fax from memory:

  1. From the Home screen, touch the Setup button.
  2. Touch the Service menu.
  3. Touch the Fax Service menu.
  4. Touch the Clear Saved Faxes button.

How do I fax from my HP printer without a phone line?

Select the “Fax” setting and enter the number on the receiving end. Press “Start” and the printer feeds and scans the documents and sends them through your wireless network. Your HP printer without a phone line works just fine when it is hooked up to the wireless network.

How do I change the ink in my HP Color Laserjet Pro MFP m479fdw?

Grasp the blue handle on the toner cartridge drawer, and then pull out the drawer. Grasp the handle on the toner cartridge, and then pull the toner cartridge straight up to remove it. Remove the new toner cartridge package from the box, and then pull the release tab on the packaging.

How do I clear the memory on my HP Color LaserJet Pro MFP m281fdw?

For instructions, go to HP LaserJet Pro – Update the printer firmware….

  1. From the Home screen, touch the Setup button.
  2. Touch the Service menu.
  3. Touch the Fax Service menu.
  4. Touch the Clear Saved Faxes button.

How do I remove the memory from my HP printer?

HP LaserJet 4100 and 4101 MFP Series

  1. Press “Power” to turn off the printer.
  2. Press and hold “Select.”
  3. Turn the printer back on while continuing to press “Select.”
  4. Release “Select” when all three lights on the printer are illuminated.
  5. Press and release “Select.” The memory will be reset and then the printer will restart.

How do I get my HP printer to scan on both sides?

Scanning two-sided documents

  1. Place a stack of similarly sized pages face-up in the input tray of the ADF, with the first page on top.
  2. Adjust the paper guides to center the stack.
  3. Slide the Duplex switch located near the ADF to the left.
  4. Open HP Solution Center.
  5. Click Scan Document.
  6. Click Scan.