What does a drop axle do?
Drop axles are similar to standard spring axles, but the spindles at the end of the tube bend up. This puts the hub higher up, generally lowering the axle closer to the ground by 4 inches center-to-center. This allows the trailer to sit lower to the ground. Lower deck height means easier loading and unloading.
What is a 3500 lb drop axle?
A 3,500 lb Capacity Drop Trailer Axle Beam is most commonly used on Enclosed trailers, Cargo Trailers, and Stock Trailers that are running 5 Lug Brake Drums or Idler Hubs, and need to have a lower deck for loading and unloading.
How much more weight can you haul with a drop axle?
In addition to Bridge Formula weight limits, Federal law states that single axles are limited to 20,000 pounds, and axles spaced more than 40 inches and not more than 96 inches apart (tandem axles) are limited to 34,000 pounds.
What is axle drop in front axle?
A dropped axle is a straight front axle that has been altered or built to drop a vehicle’s ride height. The dropped axle retains all of the original suspension components since the only alteration to the factory suspension is that the axle ends are stretched, thereby pulling the tires higher up and away from the road.
What is a drop axle on a trailer?
A Drop Axle just allows the trailer to sit lower, usually 4″ for a leaf spring style. Torsion style trailer axles handle the drop a little different. A rise or drop happens by setting the no-load Arm Start Angle. When that angle is ‘UP’, then it accomplishes a small “drop”.
What is a Dexter drop axle?
This is a completely custom guide to building your own Dexter drop axle. Drop axles are typically used on cargo, livestock, horse and some equipment trailers. They provide a lower deck height to make it easier for loading your trailer.
What is dropped axle?
A dropped axle is the axle of a vehicle that is bent upwards towards the ends, i.e. the centre is ‘dropped’. This gives two advantages: the centre of gravity of the bodywork is lowered relative to the wheels, which improves stability; secondly the wheels may be of larger diameter, giving a smoother ride over a rough surface.
What is a flip axle?
Flip Axle. The Flip Axle is a complete axle assembly frame attached to the rear frame by hinge plates and pins. The Flip Axle is used when the trailer’s axle loading exceeds the gross weight that a given state will allow on each axle.