Why is my TreadClimber not working?

Why is my TreadClimber not working?

If the power will not turn on for the Bowflex TreadClimber, make sure you are using a working outlet and that the machine is plugged in. To calibrate, turn on the machine and stand on the platform of the equipment, not directly on the belts. Hold down both the “Power” and “Slower” keys.

Does the Bowflex TreadClimber have a motor?

Can this machine be used as just a treadmill or is the elliptical action continual? The elliptical motion happens as long as you are walking. There is no motor on the TC5, so it’s powered by you.

Did Bowflex discontinue the TreadClimber?

UPDATE: The Bowflex TreadClimber series is no longer available. Also known as the ‘WalkTC’ collection, each model is a combination of treadmill, stairclimber, and elliptical trainer, which Bowflex report burns more calories than a treadmill at the equivalent belt speeds.

How do you calibrate a Bowflex TreadClimber?

1. Plug the power cord into the the wall outlet.
2. Stand on the side foot support platforms or beside the.
3. Press and hold down the POWER and SLOWER.
4. Insert the Safety Key.
5. Release the POWER and SLOWER buttons.
6. Press the START/STOP button to start calibration.
7. Calibration will take about 30 seconds.

Are there any problems with the Bowflex tread climber?

While reviewers such as the Treadmill Talk website give positive marks to the TreadClimber workouts and their ability to burn fat, occasional mechanical problems with the machine are a distinct downside. This amazing kale pesto is only 210 calories and anti-oxidant rich!

Where is the belt adjuster on a Bowflex TreadClimber?

To adjust the tension, find the belt adjusters on the base of the Bowflex TreadClimber. Use an Allen key to turn the bolts clockwise approximately one-fourth inch to tighten the belts. If you need to contact a Bowflex customer representative about a problem with your equipment, he’ll likely ask you to access the diagnostic panel of the machine.

How long does it take to calibrate a Bowflex TreadClimber?

Release the buttons and then select the “Start” option. Calibration will start automatically and takes approximately three minutes to complete. Caring for your Bowflex TreadClimber’s belt can help get rid of potential problems you may be experiencing, including odd noises or a stuck belt.

What kind of lubricant do I need for Bowflex TreadClimber?

To care for your belt, you will need to lubricate it from time to time with a silicone based lubricant that you can purchase from any hardware store. Unplug the Bowflex TreadClimber and cover the surface beneath each belt with a thin layer of the lubricant.