Why is my Sub-Zero flashing vacuum condenser?
The Vacuum Condenser message appears when the unit is not running efficiently or temperatures are too high. This can be due to a dirty condenser, a door sealing issue, or a problem with the unit. If temperatures are high, call for service.
How do you clean condenser coils on a Sub-Zero refrigerator?
Cleaning Sub-Zero refrigerator coils is relatively straightforward. Use your appliance brush to remove any dust, lint, or other debris clinging to the condenser. Be as gentle as you can with your brush, but also be sure to remove as much dirt as possible. Be careful not to damage or disconnect any other parts.
Where is the condenser on a sub-zero?
In all Sub-Zero Built-In and Pro 48 models, the condenser is located behind the grill. First pull out on the bottom edge of the grill and tilt forward. Then using a soft bristle brush vacuum to remove dust and lint from the condenser.
How do I reset my subzero 650?
To reset a Sub-Zero product:
- Turn the unit off at the control panel. For units with a dial control, turn the knob to zero (0) or off.
- Turn the home circuit breaker to the unit off for 30 seconds and back on again. Retest the unit operation.
Where is the condenser on my Sub-Zero fridge?
Where are the coils on a Sub-Zero refrigerator?
On Sub-Zero refrigerators the condenser coils are located on the top of the unit behind the large grille, and can be easily accessed by simply lifting the grille up to expose the condenser coils.
How do you clean a subzero?
Clean the Sub-Zero refrigerator interior by following these steps:
- Turn the unit off at the control panel. See How to Turn Off Dial Controls if needed.
- Use a mild detergent and water with a soft cloth. Water and baking soda paste may be used to remove tough stains.
- Rinse and dry thoroughly.
- See also: