How do you program a key fob for a 2001 Pontiac Grand Am?

How do you program a key fob for a 2001 Pontiac Grand Am?

Press and hold the LOCK and the UNLOCK buttons simultaneously on the first transmitter for approximately 15 seconds. The Power Locks should cycle to confirm programming of the first fob is complete. If you are programming more than one transmitter, repeat the previous step to program up to four transmitters.

How do you program a key fob for a 2005 Pontiac Grand Am?

Key Pairing : Instructions

  1. Insert a master/working key and switch the ignition on.
  2. Wait for the security/immobilizer light to go out. Switch ignition off and remove key.
  3. Quickly insert a UN-paired key and switch the ignition on.
  4. Wait for the security/immobilizer light to go out.
  5. The key is now paired.

Can you program a keyfob yourself?

DIY Key Fob Programming Depending on the age and model of your car, you may be able to program a replacement yourself. The procedure for do-it-yourself key fob programming can vary: Some automakers provide instructions in their owner’s manuals. Information can be found in many cases on the internet.

Can you program a key fob without the original?

You don’t need to go to a dealership to have your fob programmed but a professional locksmith IS REQUIRED if the original is not available. Absolutely, that doesn’t need a locksmith at all, dealership store can program it for free. You absolutely can.

When did the keyless entry system come out for the Pontiac Grand Am?

A keyless entry system was available in Pontiac Grand Ams beginning in the 1994 model. The system comes with a key fob remote that fits on your key chain. When a remote is lost or broken, it often involves a costly trip to a mechanic or locksmith to buy a new remote and have it programmed.

Are there Keyless remotes for other Pontiacs?

The keyless remotes for Pontiac vehicles are not compatible with other vehicles and vice versa. The remote you are attempting to program must be specifically for the Pontiac vehicle. If you have trouble programming a remote, pull it apart and replace the battery. Leonardo R. Grabkowski has been writing professionally for more than four years.

Where can I buy a new Grand Am remote?

If your Grand Am was made before 2000, you can buy a new remote from an online retailer and program it yourself in less than five minutes. Locate the programming connector in the back of the left side of the trunk.

How do you turn on a radio on a keyless entry?

Press and hold the Unlock and Lock buttons on your keyless entry for 30 seconds. When you hear a warning chime, the remote is programmed. Open the interior fuse compartment door. Examine the diagram on the back to find the fuse labeled Radio. Remove this fuse from its slot. Insert your key into the ignition.